 |
| Quantity: | |
|---|---|
Yongrui
1. product name: Best quality high pressure CNG steel pipe
2. standard and Material: ISO15500, BHG-1 or as the customers' requirement to choose the material
3. Treatment: PVC coated, Soft annealed, hot dipped galvanized; Air-tight test 30MPa
4. Product application: CNG high pressure tube is used for LPG , CNG sequential injection system conversion kits.
5. Tube Salt Spray Test hour(HHS test) : 72-200 hour
6. Thickness of zinc plated layer: 5-8 um zinc coated
7. Surface outlook: Both ends of tube without rag, corner processing, smooth, absence of istortion.
8. production flow: Steel tube is welding tube with annealing treatment before zinc plating.
9. Inside tube cleanity: no rust
10. Bending capability: Bending tube with tools of 25mm radius, bending torsion should no more than 11NM
11. Packing: plastic bag inside, carton case outside, iron frame fixed
12. PVC package requirement
Steel tube should be covered with PVC after zinc plating, single wall thickness is 0.65±0.2mm.
There is 20-50mm naked tube without PVC at the roll ends. Both ends are fit with white plastic jacket.
Chemical composition and mechanical property
CNG/LPG high pressure pipes , is used single-wall low carbon steel tube . it may be zinc-coated for corrosion protection. Then wrap 360° PVC coating outside .
Shaanxi Yong Rui Ltd. was established in 1998, the company is located in Xi’an National Economic and Technological Development Zone Fengcheng 3; registered capital of 3 million RMB, fixed assets of 500 million, the existing staff of280, has college education of technical management staff of 20 people; business in September 2003 through the national ISO9001 quality management certification.
Packing
Coils or Bundles ,then in pallets or wooden boxes
Water-proof packing, using plastic film for inner package , and plastic woven bag for outside package
Delivery Time
Within 30 days(Order quantity is between 2 Metric Tons and 5 Metric Tons)
Other situation can be followed the negotiation by two parties
Export to USA/UK/AU/RU/IRI/MYA/SPAIN
1) we have more than 10 years export experience to Iran, American, Germany, India, Myanmar etc. pleae rest assure at our quality.
2) prompt shipment : By reputed shipping line and professional documents .
3) Cargos photo : before and after loading into container .
4) packing : new and strong seaworthy packing, also can based on buyer's special request .
5) Best service after shipment with Email .
6) feedback Email after endusers .
7) can provide free samples for you check the quality . the samples need about 3-4days .
8) on-time delivery : production delivery time need about 30-40days after get the deposit .
1.Are you a trading company and manufacturer?
Yes, we have have plant and trading company, we can deal business both, but do it as condition.
2.How can I get your prices?
Pls show us your target tube size (OD ,wall), material (steel grade),coating types( coating types on OD/ID both), in coil or straight length tube(if length, how long per pcs?), quantity, packing requirement ,application and specialy requirement. Then,we can send you an exact quotation within 24 hours.
3.What's your MOQ?
For common coating type and common size, MOQ is 3000kg ; for specially coatinf type or specialy size need confirmed.
4.How can I get some samples to do quality approved?
After quotation confirmed, we can send some samples for testing, severl pieces tube are free,but big quantity maybe charged and freight should be bear by client.
5.What about the leading time for mass order producing?
Usually, 15-25 days for material preparing and producing after order confirmed, and 10 days for shipment booking and confirmed.35 days min for common size and type, special size and type need confirm.
6.Could the tube be customized for us?
Sure, we are professional supplier.when we confirmed and accept all your target requirement,we can customize the tube as your target.
Web site: www.bundypipe.com
www.sxyrgm.com
Email: sxyrgm@ 163.com
shdoshen@ 163.com
Tel: +86 29 83288570
Fax: +86 29 83288571
Facebook account: bundytube
1. product name: Best quality high pressure CNG steel pipe
2. standard and Material: ISO15500, BHG-1 or as the customers' requirement to choose the material
3. Treatment: PVC coated, Soft annealed, hot dipped galvanized; Air-tight test 30MPa
4. Product application: CNG high pressure tube is used for LPG , CNG sequential injection system conversion kits.
5. Tube Salt Spray Test hour(HHS test) : 72-200 hour
6. Thickness of zinc plated layer: 5-8 um zinc coated
7. Surface outlook: Both ends of tube without rag, corner processing, smooth, absence of istortion.
8. production flow: Steel tube is welding tube with annealing treatment before zinc plating.
9. Inside tube cleanity: no rust
10. Bending capability: Bending tube with tools of 25mm radius, bending torsion should no more than 11NM
11. Packing: plastic bag inside, carton case outside, iron frame fixed
12. PVC package requirement
Steel tube should be covered with PVC after zinc plating, single wall thickness is 0.65±0.2mm.
There is 20-50mm naked tube without PVC at the roll ends. Both ends are fit with white plastic jacket.
Chemical composition and mechanical property
CNG/LPG high pressure pipes , is used single-wall low carbon steel tube . it may be zinc-coated for corrosion protection. Then wrap 360° PVC coating outside .
Shaanxi Yong Rui Ltd. was established in 1998, the company is located in Xi’an National Economic and Technological Development Zone Fengcheng 3; registered capital of 3 million RMB, fixed assets of 500 million, the existing staff of280, has college education of technical management staff of 20 people; business in September 2003 through the national ISO9001 quality management certification.
Packing
Coils or Bundles ,then in pallets or wooden boxes
Water-proof packing, using plastic film for inner package , and plastic woven bag for outside package
Delivery Time
Within 30 days(Order quantity is between 2 Metric Tons and 5 Metric Tons)
Other situation can be followed the negotiation by two parties
Export to USA/UK/AU/RU/IRI/MYA/SPAIN
1) we have more than 10 years export experience to Iran, American, Germany, India, Myanmar etc. pleae rest assure at our quality.
2) prompt shipment : By reputed shipping line and professional documents .
3) Cargos photo : before and after loading into container .
4) packing : new and strong seaworthy packing, also can based on buyer's special request .
5) Best service after shipment with Email .
6) feedback Email after endusers .
7) can provide free samples for you check the quality . the samples need about 3-4days .
8) on-time delivery : production delivery time need about 30-40days after get the deposit .
1.Are you a trading company and manufacturer?
Yes, we have have plant and trading company, we can deal business both, but do it as condition.
2.How can I get your prices?
Pls show us your target tube size (OD ,wall), material (steel grade),coating types( coating types on OD/ID both), in coil or straight length tube(if length, how long per pcs?), quantity, packing requirement ,application and specialy requirement. Then,we can send you an exact quotation within 24 hours.
3.What's your MOQ?
For common coating type and common size, MOQ is 3000kg ; for specially coatinf type or specialy size need confirmed.
4.How can I get some samples to do quality approved?
After quotation confirmed, we can send some samples for testing, severl pieces tube are free,but big quantity maybe charged and freight should be bear by client.
5.What about the leading time for mass order producing?
Usually, 15-25 days for material preparing and producing after order confirmed, and 10 days for shipment booking and confirmed.35 days min for common size and type, special size and type need confirm.
6.Could the tube be customized for us?
Sure, we are professional supplier.when we confirmed and accept all your target requirement,we can customize the tube as your target.
Web site: www.bundypipe.com
www.sxyrgm.com
Email: sxyrgm@ 163.com
shdoshen@ 163.com
Tel: +86 29 83288570
Fax: +86 29 83288571
Facebook account: bundytube
High Pressure CNG Fuel PipeShaanxi Yongrui Industry Co.,Ltd,we’re leading manufacture of steel bundy tube and high pressure CNGfuel pipe. We has specialized in manufacturing steel tubes for automobiles and appliances for over 22 years.Our main product is CNG high pressure pipe.It’s steel tube coated
READ MORE
Double wall Welded steel bundy tubeShaanxi Yongrui Industry Co.,Ltd,we’re leading manufacture of steel bundy tube . We has specialized in manufacturing steel tubes for automobiles and appliances for over 22 years.Our main product is Double wall welded steel bundy tube.It’s made by steel strip with c
READ MORE
Single wall steel tubingShaanxi Yongrui Industry Co.,Ltd,we’re leading manufacture of steel bundy tube . We has specialized in manufacturing steel tubes for automobiles and appliances for over 22 years.Our main product is Single wall welded steel tube.It’s made by steel strip rolled 360° Characteris
READ MORE
Bundy tube, sometimes called Bundy pipe, is a type of double-walled and single-walled low-carbon steel tube manufactured by rolling a copper-coated steel strip through 720 or 360 degrees and resistance brazing the overlapped seam in a process called Bundywelding. Applications:Automotive parts (Fuel
READ MORE
