Email: sxyrgm@163.com
Tel: +86 (0)29 83288570    
Fax: +86(0)29 83288571
Mobile: +86 18591921003
You are here: Home » News » LPG CNG Sequential Injection System Autogas Conversion Kits

LPG CNG Sequential Injection System Autogas Conversion Kits

Views: 160     Author: Site Editor     Publish Time: 2021-08-06      Origin: Site



CNG LPG KITS1

With this system installed, the car will run on either petrol or LPG, it's bi-fuel system, you can switch between both fuels.

1. LPG sequential Reducer/Vaporizer (super type, power up to 250KW), come with LPG Solenoid Valve, if higher power required, use two units.
2.Gas ECU set for V5/V6/V8: Electronic Control Unit, Harness, Water Temperature Sensor, Micro-switch, Map Sensor.
ECU Software: Mach Pro, support 11 languages-- 1) English 2) Chinese 3)Polish 4) Russian 5) Thai 6) Turkish 7) Spanish 8) French 9) German 10) Dutch 11) Italian;
For 10/12/16cylinder engines, you can consider to use two sets.
3. 4cylinder Injector Rail*2units, 3cyl*2unit available also.
4. Gas Filter*2units: Installed after regualtor before injection rail, to filter the low pressure LPG
5. High pressure steel tubing: dia6mm*length6meter
6. Low Pressure Hoses
7. Mounting Fittings: Accessories for connecting/sealing/fixing the gas components, included the Low Pressure Tee (1 or 2 units) for connecting two gas rails;
8. Gas ECU Programming cable--At least 1unit is needed for new buyer, not necessary to buy if you had one yet; For Gas ECU connect to computer to calibrate/program to reach a proper air-fuel ration for different power of cars; It is special, other ones may not suit to our kits
9. Not Included Items here: LPG tank, Multivalve, tank brackets,  refuel valve, refuel hose. (Too heavy to ship or may not suit to your local requirements)

 CNG LPG kits

 

 

Quick Details


Car Fitment:

Toyota Van, TOYOTA TRUCK, AMC, ANDORIA

Year:

1978-1980, 2001-2003, 2007-2013, 2012, 2010, 2012-2013, 2011-2012, 2011-2013, 2010-2011, 2010-2013

Model:

honker, AMX, Tundra, Sienna

Engine:

4.2L, 2.5 4x4, 2.7L 2672cc 163cid, 3.5L 3456cc, 4.6L 4608cc, 4.0L 3956cc 241cid, 5.7L 5663cc 345cid, 4.6L 4608cc, 3.5L 3456cc, 3.5L 3456cc, 2.7L 2672cc 163cid, 4.6L 4608cc, 3.5L 3456cc


Warranty:1 Year, 1 Year

Place of Origin:Shaanxi, China

Certification:ISO9001/BV/ECE110R

Car Model:1.6-4.5L Injection 4/6/8 cylinder Car

type:Auto gas LPG system 4/6/8 cylinder / car sequential injection kits

OEM:Avaliable

Ambient Temperature:-40°C ~ + 120°C

Diagnostics Connector:RS232 or USB

Model Number:LPG kits

Type:FUEL TANK

Car Make:2568cyl gas engines

 

CNG kits



Advantages of LPG/LPGV modified car

1) Emissions are significantly reduced.

2) The toxicity of harmful emissions is lower than when gasoline is used. This mainly refers to the emission of hydrocarbons (HC), and the HC emission when burning LPG does not contain any more harmful components such as aromatic hydrocarbons. The hydrogen/carbon atomic ratio of LPG is 2.5~2.7, and gasoline is about 2.25. When LPG is used, CO2 emissions are lower. Considering the possibility of various compounds forming ozone, LPG emissions are definitely better than gasoline.

3) Since LPG fueled does not form an oil film on the engine intake manifold or the wall of the intake duct, and does not need to be enriched in cold state like gasoline, therefore, the emissions during the 40s after the start of the test cycle and during the warm-up process Better than gasoline. For the European III emission regulations to be implemented in the future, the adaptability is better.


 

 4 cylinder

6 cylinder

8 cylinder


Packaging & Delivery

Selling Units:Single item

Single package size: 32X29X25 cm

Single gross weight:8.000 kg

Package Type:boxes cartons palletes

Lead Time:

Quantity(Pieces)

1 - 50

51 - 100

101 - 300

>300

Est. Time(days)

10

20

30

To be negotiated

 MP48 ECU (14)packing (3)

Notice :

 

There are a few checks that need to be performed before the vehicle enters the installation workshop for conversion, to determine whether it is suitable for installation of the NGV equipment.

The structure of the vehicle must be inspected, to check if it is in a good state that allows adequate fitting of the supports of the various elements such as the NGV tank (s), the pressure regulator, the high-pressure pipe clamps, etc.

To make sure that the motor functions properly, check the following:

The ignition system: spark plugs, spark plug cables, contact points, condenser, ignition coil, ignition plate and distributor. The faulty state of any of these parts will cause a poor ignition spark, thus hindering the good functioning of the equipment.

The battery must provide 12 volts of power to the pressure regulator so that its electrovalve will open properly when the vehicle is operating on gas. The engine’s carburetion system must also work properly because even though a NGV system is being installed, the vehicle must be capable to operate in bi-fuel mode (gasoline/gas).

If the vehicle is not in good condition, the installation of the NGV system will not result in a satisfactory operation vehicle.

 

 733ec7298dd7ba3e8b7124fdde3cc16ec6f10b6a85c308552cf1e0acab29a1

MP48 ECU (16)CNG steel tube

 


6 (2).JPG
High Pressure CNG Fuel Pipe
2017 / 25 / 08

High Pressure CNG Fuel PipeShaanxi Yongrui Industry Co.,Ltd,we’re leading manufacture of steel bundy tube and high pressure CNGfuel pipe. We has specialized in manufacturing steel tubes for automobiles and appliances for over 22 years.Our main product is CNG high pressure pipe.It’s steel tube coated

READ MORE
picture 2.JPG
Double wall welded steel bundy tube
2013 / 05 / 11

Double wall Welded steel bundy tubeShaanxi Yongrui Industry Co.,Ltd,we’re leading manufacture of steel bundy tube . We has specialized in manufacturing steel tubes for automobiles and appliances for over 22 years.Our main product is Double wall welded steel bundy tube.It’s made by steel strip with c

READ MORE
DSC_0199.JPG
Single wall welded steel bundy tube
2016 / 08 / 12

Single wall steel tubingShaanxi Yongrui Industry Co.,Ltd,we’re leading manufacture of steel bundy tube . We has specialized in manufacturing steel tubes for automobiles and appliances for over 22 years.Our main product is Single wall welded steel tube.It’s made by steel strip rolled 360° Characteris

READ MORE
avatar.jpg
Bundy tube
2024 / 22 / 02

Bundy tube, sometimes called Bundy pipe, is a type of double-walled and single-walled low-carbon steel tube manufactured by rolling a copper-coated steel strip through 720 or 360 degrees and resistance brazing the overlapped seam in a process called Bundywelding. Applications:Automotive parts (Fuel

READ MORE
YongRui
Bundy tube Manufacture for 
Automotive and Refrigeration Industry

Quick Links

Products

陕ICP备17005693号http://www.miit.gov.cn/

Contact Us

 Tel: +86-029-83288575
 Phone: 18591921003
 Email: sxyrgm@163.com
 Add: No.3 Fengcheng second road,North Economic and Technological Development Zone of Xi'an
Copyright © 2017 Shaanxi Yongrui Industry Co.,Ltd   All rights reserved.